PowerMAG ppTMS

Pared Pulse with PowerMAG ppTMS ALL-IN-ONE Solution

In general ppTMS protocols usually require two stimulators connected to one coil. The PowerMAG ppTMS is a stand-alone rTMS device to allow various ppTMS protocols and rTMS protocols including Theta-burst protocols within one machine by using actively recharging between conditioning (S1) and test pulse (S2).

  • No second device or „option“ needed thanks to MAG & More´s ppTMS technology
  • Powerful rTMS, TBS and ppTMS with bi-phasic pulses in one device
  • Pulse pairs (ISI as low as 1 ms)
  • In 0,1 ms steps adjustable pulse pairs (ISI)
  • Adjustable intensity of conditioning (S1) and test pulse (S2)
  • online-EEG feasible
Maximal frequency 100 Hz
Minimal frequency 0.1 Hz
Minimal ISI1 ms
ISI minimal change value0.1 ms
Frequency minimal change value 0.1 Hz
Maximal frequency at 100% intensity 30 Hz
Maximal Intensity 100 % (30 Hz), 70 % from 15 Hz to 100 Hz with PowerUNIT
Stimulation parameters
Magnetic induction up to 4 tesla (depending on coil)
Maximum pulse power 160 Joule
Pulse shapes Half & full sine-wave
Current direction in the coil Invertible on the equipment
Rise time of the stimulation pulse 40 μs (PA)
Pulse duration 160 μs
Input/Output interface
Trigger input BNC-connector (TTL pulse, active high)
Trigger output BNC-connector (TTL pulse, active high)
External interface 8 pole DIN connector (Single pulse, repetitive mode, TBS, ramp, custom stimulation protocols possible)
Synchronisation BNC-connector
”Made in Germany“ quality
Number of discharges at 100% intensity 2000000
Electrical safety Protection class 1, Type BF
Hardware classification to MDD 93/42/EEC class IIa
Hardware certification CE 0494
Operating Parameters
Power supply voltage 120 V~, 60 Hz with PowerUNIT
Power consumption 50 VA in standby mode, 800 VA nominal rating, 2000 VA
Operating temperature 0 ⁰C to +30 ⁰C
Dimensions (width, height, depth)490 x 260 x 600 mm
Weight 38 kg