PowerMAG EEG 30

Push the Boundaries of your TMS Research

PowerMAG EEG 30 is a TMS stimulator built using innovative hardware solutions which allow continuous EEGs to be recorded without any power line noise or recharging artifact. Like every PowerMAG stimulator, PowerMAG EEG makes no compromises on the maximal intensity (100% output) in the frequency range of up to 30 Hz*.

Features
  • no decrease of pulse intensity during stimulation
  • 100% Intensity up to 30 Hz*
  • High-speed sync out interface (in selected countries)
  • Full external controllability
  • Half wave and full wave available
  • Current coil direction invertible on the equipment
  • Online EEG feasible

* depending on power supply

Maximal frequency 30 Hz
Minimal frequency 0.1 Hz
Minimal ISI33 ms
ISI minimal change value1 ms
Frequency minimal change value 0.1 Hz
Maximal frequency at 100% intensity 30 Hz *
Maximal Intensity 100 % (30 Hz), 80 % (50 Hz), 70% (100 Hz) *
Stimulation parameters
Magnetic induction up to 4 tesla (depending on coil)
Maximum pulse power 160 Joule
Pulse shapes Half & full sine-wave
Current direction in the coil Invertible on the equipment
Rise time of the stimulation pulse 80 μs (PA)
Pulse duration 160 μs
Input/Output interface
Trigger input BNC-connector (TTL pulse, active high)
Trigger output BNC-connector (TTL pulse, active high)
External interface 8 pole DIN connector (Single pulse, repetitive mode, TBS, ramp, custom stimulation protocols possible)
Synchronisation BNC-connector
”Made in Germany“ quality
Number of discharges at 100% intensity 2000000
Electrical safety Protection class 1, Type BF
Hardware classification to MDD 93/42/EEC class IIa
Hardware certification CE 0494
Operating Parameters
Power supply voltage 220/230 V~, 50 Hz, 120 V~, 60 Hz with PowerUNIT
Power consumption 50 VA in standby mode, 800 VA nominal rating, 2000 VA
Operating temperature 0 ⁰C to +30 ⁰C
Dimensions (width, height, depth)490 x 260 x 600 mm
Weight 38 kg